Project Construction Plan
Assignment

Name
Scott Doran
Date
08.12.08
Project
name
External Cladding

Construction steps
Tools and Equipment required
1
Tape the sarking down to the frame so that top one overlaps bottom.

Sarking
tape

2
Tape down the flashing on the internal and external corners so water cannot get in from any way.

Flashing
tape

3
Cut packers for the bottom row of boards and screw in so they keep the splay.

Thin packer
Drill with Phillips bit
screws

4
Screw on the bottom boards all the way around making sure that they are hard up to the corner moulds and that they are perfectly straight. Its important that the boards line up with each above coarse. Use a level.

Level
Internal/ external moulds

5
Mark 25mm down from the top of the boards at both end and this will give you your line to fix the next row of boards.

Measuring tape
pencil

6
Continue this procedure until you have covered the entire wall. Check it every now and again with a level and make sure each row of boards are an line.

level